Tuesday, August 17, 2010

Flash! Only 27 out of 47 passed the August 2010 Metallurgical Engineers Examinations.

Needs to be revised. We just can't copy our sources verbatim.


The main and only source is the official PRC web pageMETALLURGICAL ENGINEER LICENSURE EXAMINATION August 2010 accessed on Aug. 18.


Announcement of the release of the Examination Results

The results of the METALLURGICAL ENGINEER LICENSURE EXAMINATION held in the month of August 2010
were released in one (1) working day
August 17, 2010

Only 27 out of 47 passed the Professional Regulation Commission (PRC) Metallurgical Engineer Licensure Examination given by the Board of Metallurgical Engineering in Manila from August 14-16, 2010.

The Board of Metallurgical Engineering



The Board of Metallurgical Engineering consists of Enrico C. Nera as Chairman with Agustin M. Fudolig and Juancho Pablo S. Calvez as members.


First Computerized Examinations taken anywhere!

The three-day examination was held in two venues, PRC-Manila and PRC-Davao, using the Walk-in Examination System (WES), a first time for an engineering board examination setting another milestone in PRC’s modernization program. The PRC states

The WES is a user friendly, desktop, windows-based and competency-based computerized testing system that will enable an applicant to take a licensure examination anytime, anywhere.


Registration Procedures

Registration for the issuance of Professional Identification Card (ID) and Certificate of Registration will start on Thursday, August 19, 2010 but not later than August 27, 2010. Those who will register are required to bring the following: duly accomplished Oath Form or Panunumpa ng Propesyonal, current Community Tax Certificate (cedula), 2 pieces passport size picture (colored with white background and complete nametag), 1 piece 1” x 1” picture (colored with white background and complete nametag), 2 sets of metered documentary stamps, and 1 short brown envelope with name and profession; and to pay the Initial Registration Fee of P600 and Annual Registration Fee of P450 for 2010-2013. Successful examinees should personally register and sign in the Roster of Registered Professionals, prior to the oathtaking ceremonies .

Oathtaking Ceremony

The oathtaking ceremony of the successful examinees in the said examination as well as the previous ones who have not taken their Oath of Professional will be held before the Board on Thursday, September 2, 2010 at 6:00 o’clock in the evening at the Manansala A, Sulo Riviera, Matalino Road, Quezon City.

SMEP registration

Registration for membership with the Society of Metallurgical Engineers of the Philippines (SMEP) will be on September 2, 2010.

Performance of Schools

The performance of schools in the August 2010 Metallurgical Engineer Licensure Examination in alphabetical order as per R.A. 8981 otherwise known as PRC Modernization Act of 2000 Section 7(m) “To monitor the performance of schools in licensure examinations and publish the results thereof in a newspaper of national circulation” is as follows: (Any discrepancy in the report is not intentional on the part of the Commission, but rather due to miscoding of school codes by the examinees themselves. Concerned schools may write the Commission for correction.)

SchoolPassedFailedTotal%passed
Mapua Institute of Technology0 3 3 0%
MSU-ILigan 14 11 2556%
UP-Diliman 13 6 1968.42%


Any discrepancy in the performance of schools listed above is entirely unintentional on the part of
the Professional Regulation Commission but rather due to miscoding of school codes by the examinees
themselves in the application forms. Concerned schools may write the Commission for correction.



Top Ten Passers


The successful examinees who garnered the ten (10) highest places are the following:

RANK
NAME

SCHOOL

RATING(%)

1
RACHELLE ANNE VELASCO SAYO
UNIVERSITY OF THE PHILIPPINES - DILIMAN
83.85
2
VAN KENNETH SAMALEA AQUINO
UNIVERSITY OF THE PHILIPPINES - DILIMAN
82.65
3
VIRGILIO TOLOSA FLORES JR.
MINDANAO STATE UNIVERSITY – ILIGAN INSTITUTE OF TECHNOLOGY 82.60
4
MARIA LUISA AMMUGAUAN SAJONAS
UNIVERSITY OF THE PHILIPPINES - DILIMAN
82.20
5
AARON ANTHONY CORPUZ NIEVERAS
UNIVERSITY OF THE PHILIPPINES - DILIMAN
80.80
6
KHIM MORA COMANDANTE UNIVERSITY OF THE PHILIPPINES - DILIMAN
80.75
7
FRANCO DANILO CRUZ LUISTRO
UNIVERSITY OF THE PHILIPPINES - DILIMAN
80.70
8
FREDERICK SEBASTIAN REMOLANA
UNIVERSITY OF THE PHILIPPINES - DILIMAN
80.55
9
VICENTE JEROME EMPHASIS
MINDANAO STATE UNIVERSITY – ILIGAN INSTITUTE OF TECHNOLOGY
80.40
10
EILEEN ROSS LAUREANO ESPIRITU
UNIVERSITY OF THE PHILIPPINES - DILIMAN
79.75

The list of successful examinees in the METALLURGICAL ENGINEER LICENSURE EXAMINATION held on August 14, 15 & 16, 2010. Click here to view


  1. ALFARO, JAMES SANCHEZ
  2. AQUINO, VAN KENNETH SAMALEA
  3. BAGSICAN, CHERRY ANN LUMACAD
  4. CAPIRAL, SHELDA PITOGO
  5. COMANDANTE, KHIM MORA
  6. CONSTANTINO, LOUIE MADERAL
  7. DE LA VEGA, ERIK PAOLO MAPILE
  8. EMPHASIS, VICENTE JEROME
  9. ESPIRITU, EILEEN ROSS LAUREANO
  10. FLORES, VIRGILIO JR. TOLOSA
  11. GALULA, CHARMAINE HOPE DE LOS REYES
  12. GARAY, DULCE LIBBY VANZUELA
  13. LOPEZ, BELINDA OLAVE
  14. LUISTRO, FRANCO DANILO CRUZ
  15. LUTAO, ANTONIO JR CABATO
  16. MORTEL, PERRY MACA
  17. NALDOZA, PETER WONG
  18. NIEVERAS, AARON ANTHONY CORPUZ
  19. OMEGA, ELLA FAYE TEJANO
  20. ORCINO, EMELDA EGUNA
  21. REMOLANA, FREDERICK SEBASTIAN
  22. RUFINO, FENNYLONE LAMES
  23. SAJONAS, MARIA LUISA AMMUGAUAN
  24. SALAMAT, ROBERTO JR. SORIANO
  25. SAYO, RACHELLE ANNE VELASCO
  26. SUERTE, JENNY IRIS SATAGO
  27. TUMANDA, DIONETTE CABURAL

No comments:

Post a Comment